CHNC-I limit sensors
We are retrofitting a 1986 CHNC-I that originally had the General Numerics control. The axis servos and drives were already replaced with Parker/MTS brushless motors/drives, and we now have those working very well. Now, on to the home and limit sensors. Taking them off the machine, we just see "MicroSwitch, Freeport IL", no part number or anything! The parts book shows a Hardinge part #, but that doesn't help much. Does anyone know what these sensors are? I'm pretty sure they are actually sensors, not mechanical switches, as they don't click when actuated.
The sensors all have red, black and brown wires. Typical in industrial controls, red is + supply, black is ground and brown is the sensor output. The wiring diagram kind of confirms that, but we don't know what voltages these sensors should be supplied with.
Thanks in advance for any info anyone can provide!
Jon
Similar Threads:
Re: CHNC-I limit sensors
They're called "Hall effect sensors." Transducers that switch by sensing a magnetic field. No contact necessary. Don't remember for sure, but I think the machine is 12V. They generally operate at 6-36VDC.
https://en.wikipedia.org/wiki/Hall_effect_sensor
Mike
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
Reply with Quote
