- M24 and M64
-
Member
M24 and M64
Hello, we got our hands on a hand-me-down Hardinge Elite 8/51. It's in extremely good shape, so this is a good thing.
However, I was looking through the programs that were on there, and they consistently use a M24 and M64 after every tool change, no matter what type of tool it is.
I've always programmed Haas lathes, and I've never had to use these before.
Does anyone know why they would have these in there after every tool change?
All help is appreciated.
-
-
Member
Re: M24 and M64
M24, Main spindle contouring mode off
M64, Spindle feedback from main spindle
- M24 and M64
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules