High Speed Spreadsheet

Results 1 to 17 of 17

Thread: High Speed Spreadsheet

  1. #1
    Registered MachineSMM's Avatar
    Join Date
    Mar 2003
    Location
    Minnesota
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default High Speed Spreadsheet

    I am looking for anyone who might have a High Speed Milling spreadsheet. That will give me speed, feeds, depth of cut and anything else that will come in handy for programming.

    I am using Mastercam.

    Similar Threads:
    MachineSMM


  2. #2
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Default SPREAD SHEET

    I tried to download some info but it hurts when i stick the wires
    in my ear.

    But seriously let me see what i have at work and i'll get back
    to you tommorrow eve. PEACE



  3. #3
    Member JIMMY's Avatar
    Join Date
    Mar 2003
    Location
    united states
    Posts
    201
    Downloads
    0
    Uploads
    0

    Default

    I will get you a spreadsheet tomarrow. I is feed and speeds for some materials. You can e-mail me every once in a while and I will send you an updated one. I up date it as I learn them.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  4. #4
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    I have a disk that contains info on mastercam high speed I will get it out and see about uploading some of the info to the FTP.

    This disk came from Mastercam office.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  5. #5
    Registered MachineSMM's Avatar
    Join Date
    Mar 2003
    Location
    Minnesota
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    I will take any information that I can get my hands on.

    MachineSMM


  6. #6
    Member cadcam's Avatar
    Join Date
    Apr 2003
    Location
    United States
    Posts
    3578
    Downloads
    0
    Uploads
    0

    Default

    I will get it up to the FTp this weekend and post here when it there.

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Turning Product Specialist for a Software Company, contract Programming and Consultant , Cad-Cam Instructor of Mastercam .


  7. #7
    Registered MachineSMM's Avatar
    Join Date
    Mar 2003
    Location
    Minnesota
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    Thanks

    MachineSMM


  8. #8
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Talking

    Sorry for making you wait. I uploaded the files Jimmy sent
    me to the ftp site, unspec. uploads folder.
    If you need any specific info PM or e-mail me.
    PEACE



  9. #9
    Registered MachineSMM's Avatar
    Join Date
    Mar 2003
    Location
    Minnesota
    Posts
    34
    Downloads
    0
    Uploads
    0

    Default

    Thanks

    MachineSMM


  10. #10
    Registered grantmi1's Avatar
    Join Date
    May 2003
    Location
    USA
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default

    This forum rocks and Hardmill your site rocks I am so glad I found all this. I need more.



  11. #11
    Registered cncadmin's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    6855
    Downloads
    3
    Uploads
    4

    Default

    Originally posted by grantmi1
    This forum rocks and Hardmill your site rocks I am so glad I found all this. I need more.
    Glad you like : Tell a friend or two

    Thank You,
    Paul G

    Check out-
    [URL="http://www.signs101.com"]www.signs101.com[/URL]


  12. #12
    Registered grantmi1's Avatar
    Join Date
    May 2003
    Location
    USA
    Posts
    39
    Downloads
    0
    Uploads
    0

    Default

    Friends? What friends. I am a computer hermit.. Um ya I don't have many friends that machine. You can all be my friends. I am a young whipper snapper that is continuing this high speed revolution



  13. #13
    Registered hardmill's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    499
    Downloads
    0
    Uploads
    0

    Default Cool

    Thanks for the kind words Grant.
    And welcome to the forum. Very glad to have you here.
    PEACE



  14. #14
    Registered
    Join Date
    Mar 2003
    Location
    Boston
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    Try this After down load look at the Calculator.
    http://www.betatechnical.com/autonc.htm



  15. #15
    Registered
    Join Date
    May 2003
    Location
    India, Mumbai
    Posts
    41
    Downloads
    0
    Uploads
    0

    Default

    Some of Our Customers are using Siemens 810D Control for Die & Mould machining. They use softwares like TEBIS, Surfcam etc.

    I want to know, what commands should be written on the Top of the Part Program, to run highspeed milling.

    Also how can we activate handling of acceleration & decceleration in Siemens 810D?

    smabhyan


  16. #16
    Registered
    Join Date
    Oct 2003
    Location
    USA
    Posts
    86
    Downloads
    0
    Uploads
    0

    Default

    Hi. The only true way to document feeds and speeds for machining, expecially with 5 axis machining, HSM and High Veloicity machining is to be able to obtain dynamic information to obtain correct speeds and feeds, depth of cut, etc. A general spreadsheet only contains general speeds and feeds which should be available thru most tool supply companies like Ingersol, Sandvik, etc. I am sure you can get a CD from them of data. (This information provided from them - does not include dynamics for calculations) If you want to pump up the volume and be more precise in determining your shops needs for feeds and speeds, depth of cut, material, power, etc you might look into CHiPS. It is a custom database, uses dynamics and is the cutting edge. See mfg-labs.com. There will be article out in Mold Making Technology in September 2004 called "Chatter Myths" that will tell of some dynamic information required for feeds and speeds, it might give you some insight for things to come.



  17. #17
    Registered
    Join Date
    Feb 2013
    Location
    Singapore
    Posts
    49
    Downloads
    0
    Uploads
    0

    Default Excel Spreadsheet

    Hi! I know this has been a very old topic but will someone kindly share with me your excel spreadsheet for HSM cutting conditions? Thanks in advance! I am a newbie by the way



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

High Speed Spreadsheet

High Speed Spreadsheet