Are you able to physically move the spindle? Check that the signal from the controller to the spindle amplifier is good.
Hi I have an HSD ES 929 10hp spindle that stopped working on a Shopsabre is510. I have tried restart, home, reboot, checked for power in the incoming cord? Thanks in advance!
Are you able to physically move the spindle? Check that the signal from the controller to the spindle amplifier is good.
Shopsabre teck support is badass! They helped me in every way we checked all possibilities and they walked me throught the fix.
Is there an error message on the VFD display?
[FONT=Verdana]Andrew Werby[/FONT]
[URL="http://www.computersculpture.com/"]Website[/URL]
By any chance, can you share your fix? Same problem on same machine for me.