Need Help! Haas rotary/indexer controller protection


Results 1 to 6 of 6

Thread: Haas rotary/indexer controller protection

  1. #1
    Registered
    Join Date
    Jun 2007
    Location
    USA
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default Haas rotary/indexer controller protection

    Hi,
    We have Haas rotary/indexer controller box and some of the parameters are protected. Is there any way to unlock the protections. I know that you have to call Hass to get ther code. Is there any way without call ing them? Any formula?
    Thanks

    Similar Threads:


  2. #2
    Registered serviceman's Avatar
    Join Date
    Apr 2007
    Location
    usa
    Posts
    178
    Downloads
    0
    Uploads
    0

    Default

    parameter 30 times 1027 then convert to hexadecimal then invert the last 2 pairs to the right of numbers ie: if you end up with 1b52then make it 521b then take this number and convert to decimal then type the result into parameter 30 immediately goto parameter 24 and subtract 8 to keep the lock off.

    REYTECH Machine Service Corp. CNC repair NY, NJ
    http://www.reytechmachine.com


  3. #3
    Registered
    Join Date
    Dec 2009
    Location
    us
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Haas rotary/indexer controller protection

    This works -- Thank You !!!!!! - i have a haas s5c rotary indexer



  4. #4
    Member extanker59's Avatar
    Join Date
    Mar 2008
    Location
    USA
    Posts
    638
    Downloads
    0
    Uploads
    0

    Default Re: Haas rotary/indexer controller protection

    Lol. Ah, fun times



  5. #5
    Registered
    Join Date
    Dec 2013
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Haas rotary/indexer controller protection

    I couldn't get this to work. I have an old box from 2004. It has 5 digits in the parameters and I keep getting an 8 digit code with this formula.



  6. #6
    Member
    Join Date
    Apr 2018
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: Haas rotary/indexer controller protection

    I am having the same problem as Steve.s
    Can anyone tell us how to do this on an older unit with no letters on the keyboard and only 5 digits in the parameter?

    Thanks



  7. #7
    Member
    Join Date
    May 2011
    Location
    Mexico
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: Haas rotary/indexer controller protection

    Quote Originally Posted by serviceman View Post
    parameter 30 times 1027 then convert to hexadecimal then invert the last 2 pairs to the right of numbers ie: if you end up with 1b52then make it 521b then take this number and convert to decimal then type the result into parameter 30 immediately goto parameter 24 and subtract 8 to keep the lock off.
    Hi
    I need to modify parameter 20. but this procedure does not work for me.

    -- I convert the value in parameter 30 to hexadecimal
    -- in the hexadecimal number I move the two digits as you explain
    -- I convert the new hexadecimal number to decimal
    -- the decimal number is written in parameter 30 (but writing it does not keep the value)
    -- and in parameter 24 it does not allow me to modify the value


    regards



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas rotary/indexer controller protection

Haas rotary/indexer controller protection