In the back of a haas vf5, on the board that has the spare m codes, there are 2 status light k29 and k30 that are the green and red status lights on the top of the control. I was wondering where those output so I can hook a plc to the green and red lights? Any info is appreciated.
Similar Threads:
The wiring diagram I have shows K29 Green Strobe connected to Pin 9 and 10 on connector P3 of the i/o board, and K30 Red Strobe connected to Pin 11 and 12 on connector P3 of the i/o board. Both these functions are fed from the MOCON board connector P14 via Cable 540In the back of a haas vf5, on the board that has the spare m codes, there are 2 status light k29 and k30 that are the green and red status lights on the top of the control. I was wondering where those output so I can hook a plc to the green and red lights? Any info is appreciated.