2004 haas vf5 wiring

[mikeos]

In the back of a haas vf5, on the board that has the spare m codes, there are 2 status light k29 and k30 that are the green and red status lights on the top of the control. I was wondering where those output so I can hook a plc to the green and red lights? Any info is appreciated.

Similar Threads:

• 2004 HAAS VF5
• 2004 HAAS VF5 AND RENISHAW PROBE
• Haas VF5
• Anyone use a Haas VF5/40TR?

[rrbmachining]

In the back of a haas vf5, on the board that has the spare m codes, there are 2 status light k29 and k30 that are the green and red status lights on the top of the control. I was wondering where those output so I can hook a plc to the green and red lights? Any info is appreciated.

The wiring diagram I have shows K29 Green Strobe connected to Pin 9 and 10 on connector P3 of the i/o board, and K30 Red Strobe connected to Pin 11 and 12 on connector P3 of the i/o board. Both these functions are fed from the MOCON board connector P14 via Cable 540