Need Help! Haas editing question


Results 1 to 3 of 3

Thread: Haas editing question

  1. #1
    Member Nominally-Challenged's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Haas editing question

    How do I "find and replace all" in program, at controller, on Haas mill? (i.e. replacing multiple F283. with F100. But don't want to do it one at a time).

    Similar Threads:


  2. #2
    Member Machineit's Avatar
    Join Date
    Mar 2010
    Location
    USA
    Posts
    1844
    Downloads
    0
    Uploads
    0

    Default Re: Haas editing question

    Go to your program and hit edit. That will bring up the program in a smaller box and a list of available functions above. Press F1 and that will bring up the sub functions. Arrow over to SEARCH and hit and hit the WRITE/ENTER button. (that's the button on the far right lower corner of the panel.) There is an offered function that says something like find and replace. Hit the WRITE/ENTER button again. Just kind of follow the instructions from there. It will ask you to select the text you want to replace ans enter the text you wish to replace it with. It will ask you if you want to change that one or all. If you choose all "A", it will replace of that match.

    Good luck-----Mike

    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28


  3. #3
    Member Nominally-Challenged's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Machineit View Post
    Go to your program and hit edit. That will bring up the program in a smaller box and a list of available functions above. Press F1 and that will bring up the sub functions. Arrow over to SEARCH and hit and hit the WRITE/ENTER button. (that's the button on the far right lower corner of the panel.) There is an offered function that says something like find and replace. Hit the WRITE/ENTER button again. Just kind of follow the instructions from there. It will ask you to select the text you want to replace ans enter the text you wish to replace it with. It will ask you if you want to change that one or all. If you choose all "A", it will replace of that match.

    Good luck-----Mike
    Thanks Mike



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas editing question

Haas editing question

Haas editing question