Originally Posted by
Dfarmer
I have an HS-1 that I got last year and have been fixing up, Im also interested in adding a 5th axis to it. I have seen machines with dual 5th axis(1 on each pallet) and they had 6 drives inside the cabinets, however im not sure what they did to wire up the drives, and what parameters had to be changed. Also I dont know if it was full simultanious 5th axis or just indexing, I would assume indexing.
I was able to modify the HAAS post in fusion 360 to get the A axis working correctly, if you want I can post up some details on how to do that, which also would apply to posting 5 axis gcode.
You can find the service and operator manuals for the HS-1 on the haas website.
Sent from my SM-N986U1 using Tapatalk