[QUOTEI'd like to try port#2][/QUOTE]
Port #2 is for auxiliary axis communications.
Say a rotary axis driven thru a stand along box.
I don't think you can use it for loading / unloading / DNC to the main control.
I am having problems with my #1 RS-232 port sending programs. I'd like to try port#2, so how do you activate it for communications.
Thanks----Mike
Similar Threads:
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
[QUOTEI'd like to try port#2][/QUOTE]
Port #2 is for auxiliary axis communications.
Say a rotary axis driven thru a stand along box.
I don't think you can use it for loading / unloading / DNC to the main control.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks---kinda had that notion. Oh well, it was worth a try.
Mike
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28