Need Help! Haas High speed machining won't turn back on, after turning it off


Results 1 to 2 of 2

Thread: Haas High speed machining won't turn back on, after turning it off

  1. #1
    Member
    Join Date
    Apr 2017
    Location
    Netherlands
    Posts
    8
    Downloads
    0
    Uploads
    0

    Question Haas High speed machining won't turn back on, after turning it off

    Hi,

    I have a problem with my OM2a
    I (temporarily) disabled high speed machining.
    Because I wanted to see what the difference was in machining time.

    After I did my test, (and o boy what a difference.) I wanted to turn it back on.
    However I am unable to do this, when I try to change the parameter back from 0 to 1, I get a beep, but nothing happens.
    Other parameters a can change with no problem only high speed machining won’t turn back on.

    Hopefully it’s something stupid and it’s an easy fix.
    I have an OM2a Office Mill from 2007

    Similar Threads:
    Last edited by eddyheide; 08-01-2020 at 12:01 PM. Reason: typo


  2. #2
    Member
    Join Date
    Jun 2018
    Location
    on my feet
    Posts
    962
    Downloads
    1
    Uploads
    0

    Default Re: Haas High speed machining won't turn back on, after turning it off

    I've never known of anyone ever turning it off but if it won't let you turn it back on then , you may need to re-enter your code or it's possible you'll need to get a new code from haas
    I agree , the difference of having hsm vs not is a night and day difference



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas High speed machining won't turn back on, after turning it off

Haas High speed machining won't turn back on, after turning it off