Haas OM2A Door Open Door Hold


Results 1 to 2 of 2

Thread: Haas OM2A Door Open Door Hold

  1. #1
    Member
    Join Date
    Jul 2015
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Haas OM2A Door Open Door Hold

    Hello, just took delivery of my first Haas today. It's been a long time coming so I'm excited.

    After plugging the power in and providing air, I turned on the machine and received the message that the door is open. I cycled the doors a few times (mine has a sliding window and refrigerator-like door.) but that hasn't simmered down the Door Open or Door Hold messages. My machine is older so I figured I'd temporarily try the setting 51 trick (you'd think setting 51 would be much more interesting such as Area 51 shares the same digits). But after overriding setting 51, the controls then say Door Hold.

    I haven't been able to figure out where any of the door sensors are to try to toggle the switch or troubleshoot.

    Thoughts?

    Thanks.

    Similar Threads:


  2. #2
    Member MMTapps's Avatar
    Join Date
    Jul 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Haas OM2A Door Open Door Hold

    What year is your Haas?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas OM2A Door Open Door Hold

Haas OM2A Door Open Door Hold

Haas OM2A Door Open Door Hold