Need Help! Can't get past the attention screen on a Haas VF 5ss


Results 1 to 3 of 3

Thread: Can't get past the attention screen on a Haas VF 5ss

  1. #1
    Member willtomdrew's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Can't get past the attention screen on a Haas VF 5ss

    I run a Haas VF 5ss at work. Tried to start it up and it won't go past the ATTENTION screen. Any and all advice would be greatly appreciated.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Can't get past the attention screen on a Haas VF 5ss-img_0148-jpg  


  2. #2
    Member
    Join Date
    Sep 2012
    Location
    US
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Can't get past the attention screen on a Haas VF 5ss

    Looks like a file went bad in the operating system. My guess is your only option is to call someone out to reload / reflash the operating system. I got a "free" upgrade on my new 2019 VF2 last fall. The tech had a magic USB thumb drive that did the magic. Took about 20 minutes. Hopefully, that's all you - otherwise, I'll bet they will want to replace the motherboard.

    Good Luck



  3. #3
    Member willtomdrew's Avatar
    Join Date
    Apr 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Can't get past the attention screen on a Haas VF 5ss

    You were right, language file somehow got corrupted. We had a tech come out, ended up replacing the motherboard 10k later. 5k if you send the board back. Works fine now.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Can't get past the attention screen on a Haas VF 5ss

Can't get past the attention screen on a Haas VF 5ss