HAAS Haas DM-2 Home position posture

[jtitcomb]

Hello,
Can someone verify for me how the machine axes are positioned when the machine is sent home.
Or point me to the manual?
Either G28 X0Y0Z0 or G52 X0Y0Z0.
I don't own one, I'm building a machine simulation for one.
Thanks in advance.

Similar Threads:

• Haas vce problem only one axis in position
• Need Help!- Haas Position Readouts
• Haas hl2 tailstock not reading position
• Haas TL1 Loosing Z Position
• Coolant spigot position Haas VF-0