Haas mini mill lubrication pump problem.

[Mike T.]

Hi,
Would anyone have a photo of an older 2000 mini mill lubrication pump manifold/air/solenoid valve setup.
I re piped the air system so that the air inlet gauges and regulators are more accessible and higher off the floor, but it has been a while and want to be sure that everything gets re attached properly.

Thanks!

Similar Threads:

• Haas Mini Mill Homing X Limit Switch Problem
• Haas Super Mini Mill 2 ATC problem
• Haas Mini Mill Coolant Pump Issue
• Haas Super Mini-Mill and Haas Trunnion Table
• tool changer problem on haas mini mill

[2ferrous]

Here are some pics of my set up.
Basically original other than I've wired the lube pump directly into the 115vac so it runs all the time.
If you need close ups or other angles, just let me know.

Timothy