Need Help! Haas mini mill lubrication pump problem.


Results 1 to 2 of 2

Thread: Haas mini mill lubrication pump problem.

  1. #1
    Member
    Join Date
    Aug 2008
    Location
    usa
    Posts
    27
    Downloads
    0
    Uploads
    0

    Default Haas mini mill lubrication pump problem.

    Hi,
    Would anyone have a photo of an older 2000 mini mill lubrication pump manifold/air/solenoid valve setup.
    I re piped the air system so that the air inlet gauges and regulators are more accessible and higher off the floor, but it has been a while and want to be sure that everything gets re attached properly.

    Thanks!

    Similar Threads:


  2. #2
    Member 2ferrous's Avatar
    Join Date
    Jul 2010
    Location
    Canada
    Posts
    161
    Downloads
    0
    Uploads
    0

    Default Re: Haas mini mill lubrication pump problem.

    Here are some pics of my set up.
    Basically original other than I've wired the lube pump directly into the 115vac so it runs all the time.
    If you need close ups or other angles, just let me know.

    Timothy

    Haas mini mill lubrication pump problem.-lubesystem1-jpg

    Haas mini mill lubrication pump problem.-lubesystem2-jpg

    Dyna Mechtronics DM4400, HAAS VF-0E, HAAS Mini Mill


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas mini mill lubrication pump problem.

Haas mini mill lubrication pump problem.

Haas mini mill lubrication pump problem.