Very Cool!
Had the day off so I got busy with some scrap matl...
Rounded the edges, milled a stepped slot... Keeps the phone off the bottom so sound will travel outwards...
Did some engraving...
Got the fittings n ram horns at the local hardware store...
All assembled n workin so I can jam while I'm workin...
Everybody has either a music player or phone n needs some place to put it so it doesn't get damaged...
Probably will fill in the engraved text with white paint...
Enjoy... I know I am...!!!
Similar Threads:
Very Cool!
Jim Dawson
Sandy, Oregon, USA
Now try truing the phone sideways to film t!
Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28