C axis drive fault after restoring machine after battery lost


Results 1 to 2 of 2

Thread: C axis drive fault after restoring machine after battery lost

  1. #1
    Member
    Join Date
    Oct 2016
    Location
    Israel
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default C axis drive fault after restoring machine after battery lost

    Dear forum members
    Regarding Hass ST30

    I had memory lost after my battery died , so i took the Hass recovery USB and restored my machine and everything was restored except my C axis - showing me "C axis drive alarm" .
    I double checked my parameters with original machine parameters and its they are the same , tried to replace C axis drive and still kept showing the alarm.

    Before the battery died C axis was fully operational.

    Did anyone had this problem before?

    Much appreaciation! JHON

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2016
    Location
    Israel
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: C axis drive fault after restoring machine after battery lost

    ---



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

C axis drive fault after restoring machine after battery lost

C axis drive fault after restoring machine after battery lost