need help haas vf7


Results 1 to 2 of 2

Thread: need help haas vf7

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    Colombia
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default need help haas vf7

    hello i have haas vf7 , its no working with programs make in mastercam , show alarm 178 "divide by zero" . but if i make program in mdi , machine works. i have a file with some files . i only downloaded parameter files but files .mac and files .pgm i dont know how download.

    this is the readme file on backup diskete.
    EADME.
    Updated 18-Sep-98


    This file describes the contents of the floppy disk shipped with
    Haas CNC machines. The following files are included:


    nnnnn.PAR The list of parameters as machine is shipped.
    Where nnnnn is the serial number of your machine.


    APL-B.MAC O9000 Automatic Part Loader macro rev B for vertical mills.
    RP-W.MAC O9000 Horizontal mill pallet changer macro program (inches)
    RP-WE.MAC O9000 Horizontal mill pallet changer macro program (millimeters)
    VR-TOOL.MAC O9011 Tool vector retract macro program for VR machines


    O9876.PGM O9876 Engraving program needed for rev 8 mills


    QUICKLEI.PGM O9999 QuickCode program for lathes, English, inches
    QUICKLEM.PGM O9999 QuickCode program for lathes, English, millimeters
    QUICKMEI.PGM O9999 QuickCode program for mills, English, inches
    QUICKMEM.PGM O9999 QuickCode program for mills, English, millimeters
    QUICKMFI.PGM O9999 QuickCode program for mills, French, inches
    QUICKMSI.PGM O9999 QuickCode program for mills, Spanish, inches


    O3331.PGM O3331 Cut Flat VF-3: PALLET 1 (for Automatic Pallet Changer)
    O3332.PGM O3332 Cut Flat VF-3: PALLET 2 (for Automatic Pallet Changer)
    O4441.PGM O4441 Cut Flat VF-4: PALLET 1 (for Automatic Pallet Changer)
    O4442.PGM O4442 Cut Flat VF-4: PALLET 2 (for Automatic Pallet Changer)

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2016
    Location
    United Kingdom
    Posts
    319
    Downloads
    0
    Uploads
    0

    Default Re: need help haas vf7

    sounds to me more like a problem with mastercam or communications



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

need help haas vf7

need help haas vf7