You can't copy to MDI. You can output your MDI into a scratch program to save it, if you want, but you can't send it back to MDI. I know, that's not the same thing, but it might help.
On the HAAS mills the probing system erases MDI.
Is there a way to copy & past to MDI to restore code?
MDI had been used to keep little programs.
For example:
M99 P19;
;
N1;
G90;
G53 X-25. Y0;
M30;
;
N19;
M99 P99;
;
N55;
G55;
M30;
;
N99;
And much more.
Similar Threads:
You can't copy to MDI. You can output your MDI into a scratch program to save it, if you want, but you can't send it back to MDI. I know, that's not the same thing, but it might help.
________________________________________________
My blog: http://www.fletch1.com