We bought a 2006 Haas TM1 and have had it up and running for the last two weeks. Today I wrote a program using Mastercam for the indexer and ran it several times tweaking the program by using a subprogram and then without one. I uploaded a new program and before I could even look at editing it. I had an overvoltage alarm and the machine shut off after a 10 second countdown. When I try to start it now I get alarm codes: 102,123,149,178,254 and 354. the machine was only on for two hours this morning and was not used except to try to load the program. PLEASE HELP!! I talked my boss into buying this and hate for it to be bad. Thanks, Joe