Here ya go ..good luck.
1993 VF3 serial #2003
Hey Guys,
I started a thread, alarm 175. I need a picture of a 1994 I/O board so that I can see the resistor my machine has that is burnt. With a picture of a good resistor I will be able to have my board repaired and not have to buy a replacement. My machine is a 1994 VF1, serial #3225. Here is a couple pictures of the board location and burnt resistor my board. I inserted red circles around the desired area on the pictures. You will be able to see them better if you click on the pictures.
A quality image would be great so that the R41 resistor can be identified for replacement.
Similar Threads:
Last edited by teamjnz; 03-04-2014 at 10:59 PM. Reason: added info
_____________
teamjnz
Here ya go ..good luck.
1993 VF3 serial #2003
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)