Is there an option to add X/Y/Z limit stops on a Haas controller?

Results 1 to 3 of 3

Thread: Is there an option to add X/Y/Z limit stops on a Haas controller?

  1. #1
    Member
    Join Date
    May 2013
    Location
    United States
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Is there an option to add X/Y/Z limit stops on a Haas controller?

    From time to time when I'm doing a quick manual cut on my Haas super mill I want to be able to set up a soft stop via the control panel... so for example I want to be able to manually move 5.25" in the X direction and when it hits that point it stops.

    I know this can be achieved by writing up some quick code, but I'm just curious if this is possible from the control panel on the machine by using the user coordinate system?

    If i use the Jog lock button and select my direction it will continue till it hits the mechanical limit switches.... so my question is there a way to set a Soft limit to stop at a specific distance or coordinate?

    Thanks,

    Kent

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1043
    Downloads
    4
    Uploads
    2

    Default Re: Is there an option to add X/Y/Z limit stops on a Haas controller?

    ...is this what you're thinking "USER TRAVEL LIMITS" in Settings
    https://www.haascnc.com/video/haas-a...rlz5_zqxo.html



  3. #3
    Member
    Join Date
    May 2013
    Location
    United States
    Posts
    89
    Downloads
    0
    Uploads
    0

    Default Re: Is there an option to add X/Y/Z limit stops on a Haas controller?

    Yes, that is what I am after.... but unfortunately I don't have the next generation controller... which is a bummer...



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Is there an option to add X/Y/Z limit stops on a Haas controller?

Is there an option to add X/Y/Z limit stops on a Haas controller?

Is there an option to add X/Y/Z limit stops on a Haas controller?