- Is there an option to add X/Y/Z limit stops on a Haas controller?
-
Member
Is there an option to add X/Y/Z limit stops on a Haas controller?
From time to time when I'm doing a quick manual cut on my Haas super mill I want to be able to set up a soft stop via the control panel... so for example I want to be able to manually move 5.25" in the X direction and when it hits that point it stops.
I know this can be achieved by writing up some quick code, but I'm just curious if this is possible from the control panel on the machine by using the user coordinate system?
If i use the Jog lock button and select my direction it will continue till it hits the mechanical limit switches.... so my question is there a way to set a Soft limit to stop at a specific distance or coordinate?
Thanks,
Kent
Similar Threads:
-
-
Member
Re: Is there an option to add X/Y/Z limit stops on a Haas controller?
...is this what you're thinking "USER TRAVEL LIMITS" in Settings
https://www.haascnc.com/video/haas-a...rlz5_zqxo.html
-
Member
Re: Is there an option to add X/Y/Z limit stops on a Haas controller?
Yes, that is what I am after.... but unfortunately I don't have the next generation controller... which is a bummer...
- Is there an option to add X/Y/Z limit stops on a Haas controller?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules