Maybe try Hiwin or THK. See if you can find any part numbers on the cars, that will point you in the right direction for the rails.
For the ball screws, again Hiwin. Or Google search for ball screw rebuilders.
Hello group, I have acquired 2006 tl2 that was used for ceramic cutting. Needless to say the machine was trashed. Will crazy or not I stripped it down to the bone and plan to rebuild it. New rails and ballscrews are about 7k from Haas. Does anyone have a recommendation to source from a different supplier? They made be proprietary so I may not have a choice but thought I would ask.
Thanks in advance.
Harry
Similar Threads:
Maybe try Hiwin or THK. See if you can find any part numbers on the cars, that will point you in the right direction for the rails.
For the ball screws, again Hiwin. Or Google search for ball screw rebuilders.
Jim Dawson
Sandy, Oregon, USA