Servo 300 Bar Feeder Blues

[DouglasR]

I'm having trouble with my Haas Servo 300 bar feed.
It's attached to an SL20 lathe.
Up to a few weeks ago, it was running fine, but now when the pusher rises to allow a bar to drop into the channel, it rockets upward at lightning speed, and slams against the stops so hard, it vibrates up and down and works its way out of the
cam stop it is supposed to lock into.
Any idea on how to have this thing rise up in a more controlled manner?
Thanks.
-Doug

Similar Threads:

• Need Help!- Fanuc O-T on Emco 320 bar feeder removed need to disable bar feeder in the logic
• SERVO 300 FEEDER SPEEDS
• Newbie- Inconsistent Haas 300 bar feeder
• Problem- Servo bar 300 bar feeder
• Servo 300 Bar Feeder

[DouglasR]

Found the issue - finally.
Haas bar feed parameters are on a sticker located on the feeder itself. Problem solved.