Need Help! Haas Lathe Post Edit


Results 1 to 2 of 2

Thread: Haas Lathe Post Edit

  1. #1
    Member Nominally-Challenged's Avatar
    Join Date
    Mar 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Haas Lathe Post Edit

    The post my company uses will not output canned cycles...but instead it outputs a myriad of lines/blocks of program with varying positions and switching back and forth from feed to rapid back to feed etc. I want to edit the post but need help getting pointed in the right direction as to what to look for.

    Similar Threads:


  2. #2
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    5717
    Downloads
    0
    Uploads
    0

    Default Re: Haas Lathe Post Edit

    What CAM software are you using? And what canned cycles do you want?

    Jim Dawson
    Sandy, Oregon, USA


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas Lathe Post Edit

Haas Lathe Post Edit