I have a program written trying to use a bar puller. I can't find any good detailed programs from Haas, the ones I find online are vague examples. Here is what I have, it works in editor on my computer but when I load it into my 96 HL2 it runs the bar pull cycle for the L count but not the part program. I've switched it around to where it ran the part first just to get to the end and run the bar pull for the L count and not repeat. Can someone tell me what I have misplaced? This is a simple spacer. I have placed codes and switched things around in various ways with no luck. Thank you in advance for any help.
You can't have 2 n100's for your sub routines
it finds the first n100and it will run it 10 times with no bar puller program
Either include the bar puller program within the n100 program or have another m97pxxx (different n number) with in the program