G71 and IF statements in Haas


Results 1 to 1 of 1

Thread: G71 and IF statements in Haas

  1. #1
    Member
    Join Date
    Apr 2007
    Location
    Australia
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default G71 and IF statements in Haas

    Hi all.
    I work in a production shop that produces shafts for conveyor rollers. These shafts vary slightly in dimensions for different clearances or bearing fits but have the same general shape. I wrote a macro that uses g71 to rough turn the profile and I have an if statement in the pq block. I test ran my macro in NC plot and everything works hunky dory but when I take it to the Haas controller it alarms out with "unexpected code". Can the controller read the statements in the canned cycle pq block? Or is it most likely a syntax error?
    Thanks for watching

    Similar Threads:


  2. #2

    Default Re: G71 and IF statements in Haas

    I also find out about this, hoping to find the best answer! tunnel rush



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

G71 and IF statements in Haas

G71 and IF statements in Haas

G71 and IF statements in Haas