TL1 spindle RPM


Results 1 to 11 of 11

Thread: TL1 spindle RPM

  1. #1


  2. #2
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    3636
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    Spindle speed override set to 80% maybe?

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Member
    Join Date
    Apr 2006
    Location
    England
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    Thanks Jim but unfortunately not that simple.



  4. #4
    Member
    Join Date
    Oct 2007
    Location
    usa
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    spindle limited in settings?



  5. #5
    Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    3636
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    Is G50 limiting the spindle speed?

    Jim Dawson
    Sandy, Oregon, USA


  6. #6
    Member
    Join Date
    Oct 2007
    Location
    usa
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    Quote Originally Posted by Jim Dawson View Post
    Is G50 limiting the spindle speed?
    yes that is maxium splindle command



  7. #7
    Member
    Join Date
    Apr 2006
    Location
    England
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    I tried G50 S2000 no joy. I have been through all the settings in the book and changed a few relating to spindle speed still no joy. No matter what you ask for you alway get exactly 20% less.

    Its driving me nuts. Im starting to think that it may be an amplifier frequency issue.



  8. #8
    Member
    Join Date
    Oct 2007
    Location
    usa
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    Quote Originally Posted by smellyfeet View Post
    I tried G50 S2000 no joy. I have been through all the settings in the book and changed a few relating to spindle speed still no joy. No matter what you ask for you alway get exactly 20% less.

    Its driving me nuts. Im starting to think that it may be an amplifier frequency issue.
    G97-G98 ALSO CONTROL SPINDLE SURFACE FOOTAGE.



  9. #9
    Member
    Join Date
    Apr 2006
    Location
    England
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    gregoryblane G97S1000M03 in MDI gives me 800RPM (CSS off) even after turning off and clearing the memory. Manual mode also only gives me 800RPM.



  10. #10
    Member
    Join Date
    Oct 2007
    Location
    usa
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    what about a gear change? may not have gears I have tl1 belt drive
    m41 low m42 high???
    running out of ideas



  11. #11
    Member
    Join Date
    Apr 2006
    Location
    England
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: TL1 spindle RPM

    I tried that too. It made no diference also tried belt compensation in parameters, no joy. Thanks for trying.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TL1 spindle RPM

TL1 spindle RPM

TL1 spindle RPM