Need Help! Haas TL2 Lathe Alarm 177


Results 1 to 1 of 1

Thread: Haas TL2 Lathe Alarm 177

  1. #1
    Member
    Join Date
    Mar 2005
    Location
    United States
    Posts
    44
    Downloads
    0
    Uploads
    0

    Default Haas TL2 Lathe Alarm 177

    When I power up the lathe I get alarm 177 and get a time out.

    The lathe is 220v single phase I was told it was moved about 20 ft in the shop and hooked back to the same disconnect it worked fine before being moved.

    It has been sitting for a few years with the main power off.

    Where do I start troubleshooting with this?

    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Haas TL2 Lathe Alarm 177-img_20190711_161921-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Haas TL2 Lathe Alarm 177

Haas TL2 Lathe Alarm 177