ST30Y next gen control question


Results 1 to 2 of 2

Thread: ST30Y next gen control question

  1. #1
    Registered
    Join Date
    Feb 2012
    Location
    Seattle
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default ST30Y next gen control question

    Just got a brand new ST30Y with the next gen control. Have two other older HAAS machines and for the life of me I can't seem to find setting 36 on the next gen control. If I try to start a program mid way thru on the older HAAS machines they will apply all the offsets, start the spindle and move to the position it should be in before the line of code you selected as the start point. Setting 36 controls this and when I try and find it on the next gen control nothing comes up. I search for 36 and press down and it comes up blank like that's not even a setting. YouTube videos show that it's available on the next gen control so I don't know what to do. Anyone have experience with the next gen control that can help me out.

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2010
    Location
    Ukraine
    Posts
    30
    Downloads
    0
    Uploads
    0

    Default Re: ST30Y next gen control question

    This setting was removed to prevent possible crash during restart program. It is recommended to use other tools, like subprogram.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

ST30Y next gen control question

ST30Y next gen control question