Oring groove tool


Results 1 to 5 of 5

Thread: Oring groove tool

  1. #1
    Registered
    Join Date
    Oct 2011
    Location
    us
    Posts
    19
    Downloads
    0
    Uploads
    0

    Default Oring groove tool

    I have been searching for a .125 oring groove tool to tun an oring groove on some stock . does anyone have any suggestions or part numbers for the holders and inserts . all of the tooling places I have talked to had no idea and kept telling me I need an end mill .

    Thanks

    Similar Threads:


  2. #2
    Gold Member Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    2709
    Downloads
    0
    Uploads
    0

    Default Re: Oring groove tool

    For a lathe, grooving tool, like a parting tool. or just use a 0.125 wide parting tool.

    https://www.google.com/search?q=groo...w=1815&bih=952

    Jim Dawson
    Sandy, Oregon, USA


  3. #3
    Gold Member Machineit's Avatar
    Join Date
    Mar 2010
    Location
    USA
    Posts
    1768
    Downloads
    0
    Uploads
    0

    Default Re: Oring groove tool

    I think what you are looking for is something like in the picture below. This one is made by Valenite. The problem with these is that they are only good for one diameter of groove because the support section must match the groove. This one is for about a 2.5" diameter groove.

    Check with the major tool supplies like Valenite, but you might want to use a grooving tool with some taper on each side to clear after cutting.

    Good luck------Mike

    Attached Thumbnails Attached Thumbnails Oring groove tool-20181207_090448_resized-jpg  
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28


  4. #4
    Gold Member Machineit's Avatar
    Join Date
    Mar 2010
    Location
    USA
    Posts
    1768
    Downloads
    0
    Uploads
    0

    Default Re: Oring groove tool

    Found this image and it is a Sandvik.

    Attached Thumbnails Attached Thumbnails Oring groove tool-z1snrvpcpex_-jpg  
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28


  5. #5
    Registered
    Join Date
    Mar 2017
    Location
    United States
    Posts
    241
    Downloads
    0
    Uploads
    0

    Default Re: Oring groove tool

    Quote Originally Posted by billwann View Post
    I have been searching for a .125 oring groove tool to tun an oring groove on some stock . does anyone have any suggestions or part numbers for the holders and inserts . all of the tooling places I have talked to had no idea and kept telling me I need an end mill .

    Thanks
    you need a new tooling vendor

    and this thread needs more blueprints- with dimensions



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Oring groove tool

Oring groove tool