Need Help! Need help with offsets values on SL 20. I want them to be from the chuck


Results 1 to 3 of 3

Thread: Need help with offsets values on SL 20. I want them to be from the chuck

  1. #1
    Member
    Join Date
    Jan 2010
    Location
    Denmark
    Posts
    107
    Downloads
    0
    Uploads
    0

    Default Need help with offsets values on SL 20. I want them to be from the chuck

    Hello

    I just got an older SL 20 and started playing around with it. my old lathe we changed a parameter so that my work offset values where from the chuck and not the machine.. i like having offset values that makes sense.

    Anyonw know if its possible to set a parameter so i take type in my offset values with the lenght from the chuck?



    Cheers

    Similar Threads:


  2. #2
    Registered
    Join Date
    Aug 2015
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Need help with offsets values on SL 20. I want them to be from the chuck

    I do not think there's any parameter for that on the HAAS cnc (I certainly never saw one), however I fail to understand how an offset measured from the chuck face (or spindle face) makes more "sense" than from the machine zero position ?



  3. #3
    Member positiverake's Avatar
    Join Date
    Sep 2005
    Location
    United States
    Posts
    267
    Downloads
    0
    Uploads
    0

    Default Re: Need help with offsets values on SL 20. I want them to be from the chuck

    look at setting 64



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help with offsets values on SL 20. I want them to be from the chuck

Need help with offsets values on SL 20. I want them to be from the chuck