NED HELP! Haas OL-1 Confetti Screen


Results 1 to 3 of 3

Thread: NED HELP! Haas OL-1 Confetti Screen

  1. #1
    Registered
    Join Date
    Nov 2017
    Location
    United States
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default NED HELP! Haas OL-1 Confetti Screen

    Hi,

    We purchased a used Haas Lathe OL-1 (2006) used from an auction. We were able to talk to several employees from the company that was selling out and they all verified that the machine had been in use up until the sale. We bought the machine, and hauled it to our shop (about 3 hour drive). When we power it up, it gives us this confetti style screen and you can see the cursor blinking in the upper left corner of the screen.
    We did replace the screen but same problem. We then did a continuity test on all ov the video cables and continuity was good on them. Looking for any ideas that anyone may have or who we should have look at it. We were in contact with our local HFO but without even looking at it they said that it needs a Maincon update which would run $8500. We would like to try to troubleshoot it before we just spend that on it. Thanks in advance for any input.



    Similar Threads:
    Attached Thumbnails Attached Thumbnails NED HELP! Haas OL-1 Confetti Screen-20171129_155613_zpsbxkh27ag-jpg   NED HELP! Haas OL-1 Confetti Screen-20171129_155616_zpscvex5txs-jpg   NED HELP! Haas OL-1 Confetti Screen-20171129_155624_zpsgmum8sq9-jpg  


  2. #2
    Member jcsb's Avatar
    Join Date
    Sep 2011
    Location
    United States
    Posts
    42
    Downloads
    3
    Uploads
    0

    Default

    We have exact same problem! What was turned out to be the problem?
    John



  3. #3
    Member
    Join Date
    Apr 2006
    Location
    Viet Nam
    Posts
    48
    Downloads
    0
    Uploads
    0

    Default Re: NED HELP! Haas OL-1 Confetti Screen

    Maincon PCB error if all cable not lose when transport. Can you take picture of Maincon PCB?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NED HELP! Haas OL-1 Confetti Screen

NED HELP! Haas OL-1 Confetti Screen

NED HELP! Haas OL-1 Confetti Screen