Haas HL-2 Tool Holders

[Alex VF]

Hello everybody,

I am thinking of purchasing a Haas lathe HL-2 model 1998. I have no experience in CNC lathes (only manual lathes) but I do have experience in VMC (we have 2 Haas, a VF-0 and a VF-1) so I prefer a Haas lathe. I turn occasionally so I do not want to spend a lot of money on a CNC lathe.

I checked the lathe but the tool holders seem to be a little problem since they are unique and to hard to find them nowadays on the market. I am informed that you can make them yourself so I would like to know if anybody has made hiw own tool holders.

If possible I also like to hear your opinion about the lathe and whether it would be a good choice. I mostly trun aluminum parts. From what I can see on the internet it seems to be a simple and reliable machine.

Thank you in advance for your help.

Regards,

Alex

Similar Threads:

• Need Help!- Haas ST10 tool holders
• Dumb qestion, I came across a tool while looking for BT35 tool holders on Ebay.
• New Haas SL-30: Looking for Tool holders
• Tool holders / Retention studs (BT40/HAAS)
• Haas HL-4 info, help, manuals, and tool holders

[Ydna]

We have one at the school, and indeed ended up making some new holders for it. The design is such that overtightening can damage them.
I don't have the dimensions electronically so I'll have to search around. You may also need to make the special spanner wrench but that's much easier.

If I could get one of the machines for a decent price and decent condition, I'd say pick it up if you have the need for it. They're a bit older and not as fast or powerful as the newer machines but saving money with an older one can be nice too.

[txcncman]

Yes, you can make your own tool holders. Question will be, "Is it cost effective?" I would make them from alloy steel (4140 probably) and have them case hardened for longevity.

Heck, I have made my own inserted tools before. Once I made a 2.500 diameter 28.000 long boring bar for a CNMG 432 insert.

[Geof]

..."Is it cost effective?".....

Do you know of a source for the older Haas HL tool holders?

[txcncman]

@Geof - If you were asking if I know of a source, no, I do not know of a source for older tool holders.

[WallyL7]

Like the other thread....just make your own. Nothing really tricky about making those holders.

You may find them on ebay or other auctions that have haas lathes though for cheap.

[GPdriver]

https://globalcnc.com/hl2_tool_holde...ool_holder.htm