Trijicon RMR

Results 1 to 3 of 3

Thread: Trijicon RMR

  1. #1
    Member
    Join Date
    Apr 2017
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Trijicon RMR

    I would've thought this would be simple to find but it's proving to be somewhat elusive. I'm planning on getting a Trijicon RMR and I've been trying to find the exact dimensions of the unit so I can go ahead and program it before I get it. Does anyone have the dimensions on how the cut should be, and how deep into the slide should the cut be? Thanks



  2. #2
    Registered
    Join Date
    May 2011
    Location
    U.S.A.
    Posts
    1
    Downloads
    0
    Uploads
    0
    Last edited by NEO Dan; 10-23-2017 at 11:43 PM. Reason: Add another link


  3. #3
    Member
    Join Date
    Apr 2017
    Location
    United States
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Trijicon RMR

    Thanks Dan, I had found the one on Rifleshooter.com a long time ago but was never able to find the one directly from Trijicon, now hopefully I can get it on a machine.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trijicon RMR

Trijicon RMR