Will Argon drive work with a more powerful servo?


Results 1 to 4 of 4

Thread: Will Argon drive work with a more powerful servo?

  1. #1
    Registered
    Join Date
    Mar 2011
    Location
    New Zealand
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Will Argon drive work with a more powerful servo?

    Hi, I have been lucky enough to score a couple of brand new freebie 3KW Sanyo Denko Q1 200V AC servos c/w encoders, model Q1AA13300DXS00. I am wondering whether I could run these off an Argon drive, albeit under-powered but effectively using them to give me up to the 1500W maximum rating from the drive? I'll prob never need this sort of grunt but they are a nice durable heavy duty servo so why not use them?

    Any one got an opinion on this?

    thanks
    Rich

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jul 2004
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Will Argon drive work with a more powerful servo?

    Hey Rich,
    I am using an Argon on my direct drive force feedback wheel, driving a 2.3 KW servo without any issues. Of course, I am running at a lower RPM, but delivering the full compliment of 19A peak of sine without any issues.

    So the short answer is yes, if it is a quality motor, you can under drive it and it will still work pretty well, just depends on your final application.

    Cheers,
    Beano



  3. #3
    Registered
    Join Date
    Mar 2011
    Location
    New Zealand
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Will Argon drive work with a more powerful servo?

    thanks yes I am looking forward to trying this I need to buy my Argon and also some motor connectors for the Sanyo Denki motor. cheers Rich



  4. #4
    Registered
    Join Date
    Jul 2004
    Posts
    108
    Downloads
    0
    Uploads
    0

    Default Re: Will Argon drive work with a more powerful servo?

    All good Bud, no worries. Keep us posted

    Cheers,
    Beano



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Will Argon drive work with a more powerful servo?

Will Argon drive work with a more powerful servo?