Problem Polishing underside of stone Issue

Results 1 to 1 of 1

Thread: Polishing underside of stone Issue

  1. #1
    Member JellyTonic's Avatar
    Join Date
    Sep 2021
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Polishing underside of stone Issue

    Hello again. I'm new to the site so I seem to be bombarding with posts at the moment thanks for baring with me!
    At the moment i'm trying to utilize the CNC a bit more for what we do and have recently looked into getting the machine to polish all the undersides of our Counter tops. However in doing this i've found that when i try to get the machine to polish say 40mm in from the edge of the top the program won't recognize it as an edge to polish however when I program it to do a 350mm "Seen under" of a breakfast bar it has no problem. ill attach a photo below as I know this isn't the best of explanations. How would I be able to get the machine to recognize these smaller edges as "Working edges"

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Polishing underside of stone Issue-untitled-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Polishing underside of stone Issue

Polishing underside of stone Issue

Polishing underside of stone Issue