Polishing underside of stone Issue
Hello again. I'm new to the site so I seem to be bombarding with posts at the moment thanks for baring with me!
At the moment i'm trying to utilize the CNC a bit more for what we do and have recently looked into getting the machine to polish all the undersides of our Counter tops. However in doing this i've found that when i try to get the machine to polish say 40mm in from the edge of the top the program won't recognize it as an edge to polish however when I program it to do a 350mm "Seen under" of a breakfast bar it has no problem. ill attach a photo below as I know this isn't the best of explanations. How would I be able to get the machine to recognize these smaller edges as "Working edges"
Similar Threads:
Reply with Quote
