Best plastic material for machining on CNC routers?

Results 1 to 8 of 8

Thread: Best plastic material for machining on CNC routers?

  1. #1
    Member
    Join Date
    Feb 2008
    Location
    USA
    Posts
    263
    Downloads
    0
    Uploads
    0

    Default Best plastic material for machining on CNC routers?

    I am looking for best plastic material for machining on CNC routers. I wish to make parts for model cars. I have 3D printer but a job like an engine block for 1/4th scale model cars can take 24 or more hours. Any suggestions? I know that there are different kinds of plastic materials. I want a plastic material that can be machined as if it is plywood.

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2015
    Posts
    162
    Downloads
    0
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?

    Hdpe cuts like butter and is fairly inexpensive. It is tough to glue though if the parts need that for assembly.



  3. #3
    Member peteeng's Avatar
    Join Date
    Jul 2018
    Location
    dum dum
    Posts
    2577
    Downloads
    0
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?

    Hi Jeff - Acetal (POM) is very good for detailed work. Takes threads well and has a nice hard sharp feel. I've used it a lot for aluminium replacement in mining instruments...Peter



  4. #4
    Member
    Join Date
    Nov 2013
    Posts
    1088
    Downloads
    0
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?

    Hi,
    the biggest problem with machining plastics is they heat up and then gum up the tool. They all do it to a certain extent but some are easier than others.

    Hard acrylics and polycarbonates machine reasonably well especially if you can use an air blast to remove chips from the cutzone, recutting chips is
    a sure recipe for disaster.

    I go with Peteng, I like acetal. Its hard enough to form chips rather than long strings and yet has just enough flex to be a tough material, especially for small parts.
    I now regularly use flood cooling on acetal, in fact ALL plastics, it flushes the chips out of the cutzone and vastly reduces the propensity for loading up the tool.

    The hardest to machine (without tool build up) is polyethylene (with plasticizers) or teflon (PTFE). I reduce the surface speeds somewhat but maintain a fairly
    aggressive chip load with as open a toolpath and as much blast and/or coolant as I can muster.

    Craig



  5. #5
    Member CitizenOfDreams's Avatar
    Join Date
    Nov 2012
    Location
    USA
    Posts
    1046
    Downloads
    4
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?

    Polycarbonate and acetal are my favorite plastics to machine. ABS also cuts very easy, but I have only tried thin sheets - does it come in thick blocks too?



  6. #6
    Member
    Join Date
    Feb 2008
    Location
    USA
    Posts
    263
    Downloads
    0
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?



  7. #7
    Member
    Join Date
    Nov 2013
    Posts
    1088
    Downloads
    0
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?

    Hi,
    yes it will work....its really a question of how well. Why don't you buy a piece and try it out.

    Then go to a engineering plastic supplier and get some offcuts of acetal, acrylic and maybe some HDPE. A box of beer will get enough offcuts to
    fill a wheelbarrow!

    I suspect that you'll find its less about the type of plastic but more about the tools, feeds and speeds and MOST importantly air blast/flood coolant.
    If you can keep plastic cool and stop it from gumming up your tools then machining plastic is a breeze.

    Craig.



  8. #8
    Member
    Join Date
    Dec 2003
    Location
    East Anglia,England
    Posts
    871
    Downloads
    0
    Uploads
    0

    Default Re: Best plastic material for machining on CNC routers?

    I agree that acetal and hdpe cut very nicely,just be aware that if you machine a lot off them,they may curl up a bit.I have machined a long taper on acetal on a vacuum hold down and when the vacuum was turned off exactly that happened.Fortunately the piece was a through bolted spacer and the clamping pressure returned it to the intended shape.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Best plastic material for machining on CNC routers?

Best plastic material for machining on CNC routers?

Best plastic material for machining on CNC routers?