- OMAG Mill98 / NUM 1040 System SRAM issue
-
Registered
-
-
Registered
Re: OMAG Mill98 / NUM 1040 System SRAM issue
The first line was missing, because I had tried to press "any key" to proceed. It says "global reprom programs execution"
-
Registered
Re: OMAG Mill98 / NUM 1040 System SRAM issue
Hi. This is a "simple" one
The RAM modules are probably perfectly OK. The problem is that your battery has failed.
You need to replace the battery 0297900000 and then re-load the backup from your archive... Hopefully you have a backup, if not you will just need to contact OMAG and give them your machine serial number and affaire number of the CNC
-
Registered
Re: OMAG Mill98 / NUM 1040 System SRAM issue
Oh, and you have to answer with either Y for yes or O for yes in French
-
Member
Re: OMAG Mill98 / NUM 1040 System SRAM issue
Hello!
Finaly how do you solved the problem?
.... because I have same problem!!!:<
Best regards,
Traian.
-
Re: OMAG Mill98 / NUM 1040 System SRAM issue
Same here, any help would be apreciated. I know i have to replace the batteries, my question is, how do i reload backups if the machine doesnt boot?
- OMAG Mill98 / NUM 1040 System SRAM issue
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules