Thanks MyMind,
I was able to grind the table today. I think the finish of it is quite good but I suggest that B axis is not completely straight. I have the original values from Intermac, but when I used those, the pins did not go inside so I have changed the value in F19. The thing is I dont know how to find out when is the B axis in level. On the screen its shows me 0 but when I look at the pin its not exactly in the middle of the place where it should go in. Anyway I think I made good job I will have to make also the suction cups because also those are not straight.
In MP0 you can change almost all the parameters of the machine.
In axcfil I usually change values when I get a specific error or watchdog. If you have axis error during zeroing you open this file, go down to the specific axis and change the values of NAS, RAP with some smaller values. I removed almost all my watchdog errors thanks to changes in this file. Sometimes it still happens to me but Intermac told me its a battery or power problem inside the machine. Its a commonly known problem of the machine they told me. So its not possible to remove it completely.
I dont know exactly what do all the things mean but I was changing many things in many files so if you need something specific tell me. Atleast we can compare the values what we have.
Best regards
Mule13