5 axis machine setup creates weird offset in tool position DMG DMU50v


Results 1 to 3 of 3

Thread: 5 axis machine setup creates weird offset in tool position DMG DMU50v

  1. #1
    Member
    Join Date
    Oct 2006
    Location
    US
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default 5 axis machine setup creates weird offset in tool position DMG DMU50v

    Ive got a 2000 DMG DMU50v that Ive been using with a 3+2 post that a guy wrote for me. He also wrote a full 5 ax post that creates correct tool tip moves but offsets the tool tip in X about 4" in + and about 2" + in Z. Y tip position is ok. Test part is cutting a wide chamfer on the top of a 1.25" dia cylinder. 5 axis tab set for defaults. Heres a pic of my machine setup that was recommended to use. Pretty sure that the post is OK and that the problem is the machine setup tile. Can anyone point me in the right direction?

    Similar Threads:


  2. #2
    Member
    Join Date
    Oct 2006
    Location
    US
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: 5 axis machine setup creates weird offset in tool position DMG DMU50v

    Ive got a 2000 DMG DMU50v that Ive been using with a 3+2 post that a guy wrote for me. He also wrote a full 5 ax post that creates correct tool tip moves but offsets the tool tip in X about 4" in + and about 2" + in Z. Y tip position is ok. Test part is cutting a wide chamfer on the top of a 1.25" dia cylinder. 5 axis tab set for defaults. Heres a pic of my machine setup that was recommended to use. The dimension in Z for the 5th axis is the pivot point info from my machine parameters. This is one of the 45 deg nutated knuckle machines. Pretty sure that the post is OK and that the problem is the machine setup tile. Can anyone point me in the right direction?

    Attached Thumbnails Attached Thumbnails 5 axis machine setup creates weird offset in tool position DMG DMU50v-img_6234-jpg   5 axis machine setup creates weird offset in tool position DMG DMU50v-img_6232-2-jpg  


  3. #3
    Banned
    Join Date
    Jun 2021
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: 5 axis machine setup creates weird offset in tool position DMG DMU50v

    thx for your answer



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

5 axis machine setup creates weird offset in tool position DMG DMU50v

5 axis machine setup creates weird offset in tool position DMG DMU50v

5 axis machine setup creates weird offset in tool position DMG DMU50v