Need Help! programming blind hole radius help


Results 1 to 2 of 2

Thread: programming blind hole radius help

  1. #1
    Member
    Join Date
    Dec 2006
    Location
    usa
    Posts
    26
    Downloads
    0
    Uploads
    0

    Default programming blind hole radius help

    Hello all.

    I am trying to mill an ID radius as seen in pics.
    I have machined a funnel using an older version of Gibbs in the past.
    I'm remembering swept side with the shape in another workgroup extruded,
    I think.

    None of that is working currently.

    Gibbs 7.3.1 2D only. XY center of part in a chuck on table. Wanted to rough with a 3/8
    Flat endmill and finish with 3/8 ball. Aluminum.

    Th

    Similar Threads:
    Attached Thumbnails Attached Thumbnails programming blind hole radius help-img_20210414_154011-jpg  


  2. #2
    Member
    Join Date
    Jan 2009
    Location
    United States
    Posts
    103
    Downloads
    1
    Uploads
    0

    Default Re: programming blind hole radius help

    You can use the Spiral Plugin driven by the Geometry. You need to define the Profile in the X-Y Plane using the line and arc as if you were going to create a revolved surface or solid, then select the geometry and run the plugin. I'm not sure what version the Plugin was introduced, but it works great.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

programming blind hole radius help

programming blind hole radius help