To ALL you Mazak & CNC programmers NEED your help


Results 1 to 4 of 4

Thread: To ALL you Mazak & CNC programmers NEED your help

  1. #1
    Registered
    Join Date
    Feb 2009
    Location
    u.s.
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default To ALL you Mazak & CNC programmers NEED your help

    So my issues are we've started using CAM software to post a program. Problem is I cant use my Endmill diameter offset to increase the size of the holes, These are the G-Codes at the beginning of the program.
    G17 G20 G94 G40 G49 G80 G90 G94
    What should it be??
    ANY HELP would be appreciated.
    THANKS

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jan 2005
    Location
    USA
    Posts
    9040
    Downloads
    0
    Uploads
    0

    Default Re: To ALL you Mazak & CNC programmers NEED your help

    Quote Originally Posted by maddbomber View Post
    So my issues are we've started using CAM software to post a program. Problem is I cant use my Endmill diameter offset to increase the size of the holes, These are the G-Codes at the beginning of the program.
    G17 G20 G94 G40 G49 G80 G90 G94
    What should it be??
    ANY HELP would be appreciated.
    THANKS
    It has nothing to do what is in the first line, the first line of code like this is referred to as a safety line, but you don't need G49 or G94 in there at all

    You can either make you tool diameter bigger or smaller in the tool selection and reprocess and have a new program

    Or use cutter comp which would be G41 and G42 depending if you are cutting left or right, and to cancel cutter comp you use a G40

    In Gibbs you just have to turn Cutter Comp On and then you process, you can then make your tool adjustments in the tool offset page of your control

    Attached Thumbnails Attached Thumbnails To ALL you Mazak & CNC programmers NEED your help-cutter-comp-2-png  
    Mactec54


  3. #3
    Registered
    Join Date
    Oct 2013
    Location
    Italy
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: To ALL you Mazak & CNC programmers NEED your help

    Did you solve yet? I could help you!
    I have VTC530C with mazatrol smooth G CNC software. (these one have a EIA/ISO tools-table and mazatrol tools-table).



  4. #4
    Registered
    Join Date
    Dec 2009
    Location
    China
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    you have two g94



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

To ALL you Mazak & CNC programmers NEED your help

To ALL you Mazak & CNC programmers NEED your help