Recently got a 2001 Bport Ezpath III lathe. Works great but Im not a program at the machine guy. Ive got 4 posts from the gibbs library for ezpath. Ive heard from others that these posts work Ok.
I think Bport changed something on the latest models of their controls. Maybe because they only wanted EZCam posts to work?
So the posts do not work with my machine. It requires output that has an X and a Z move in every line, + feed if its G1. Otherwise it crashes the control with a GP error!! PGM files load and run fine.
Gcode files with the right syntax load and run fine.
In any case fired up Compost 3 and with the help of a programmer buddy was able to change the approach lines to show X and Z on same line. Wondering if theres a global command to do this?
Heres the command we used. The SeqC ' G0 X' CurrentX# ZSPC EOL is what we added.