GibbsCam Post Processor Needed


Page 1 of 2 12 LastLast
Results 1 to 20 of 35

Thread: GibbsCam Post Processor Needed

  1. #1
    Member CCAJohn's Avatar
    Join Date
    Nov 2006
    Location
    USA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Exclamation GibbsCam Post Processor Needed

    Hi
    Can anyone help me with a Post processor file (.pst, not PostHaste) for a Femco Durga 25 with fanuc 0TC. A generic 0T would be great, however if I could find a processor custom to the 24 station turret That would be wonderful. The ID turret needs to be on T0100 to index the OD turret and the OD turret needs to be on T2100 to index the ID Turret. If anyone can help, I would greatly appreciate it.
    Thanks
    CCAJohn

    Similar Threads:


  2. #2
    Registered
    Join Date
    Feb 2007
    Location
    USA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Gibbs Post

    Did you find what you were looking for? I would like to have a copy if you did get one as well as any if not all of the posts' you have for Gibbs. I am collecting a library and checking it for duplcates to make a community Master list...



  3. #3
    Registered
    Join Date
    May 2008
    Location
    New Zealand
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default DIY Mill (2 Axis)

    Hi, I am trying to build a DIY CNC mill using (Cortex stepper 2 axis control from RS Components) and would like to run this in GibbsCam - is this possible? I am new to this sort of thing so any help would be great. I think I need a Post Processor?

    Last edited by irwintools; 05-26-2008 at 05:00 PM.


  4. #4
    Registered
    Join Date
    Sep 2008
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Looking for one as well to post to a HAAS VM3 from gibbscam any luck?



  5. #5
    Registered
    Join Date
    Dec 2009
    Location
    USA
    Posts
    6
    Downloads
    0
    Uploads
    0

    Exclamation

    Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.

    Attached Files Attached Files


  6. #6
    Registered
    Join Date
    Nov 2011
    Location
    Bosnia and Herzegovina
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by MrCntry View Post
    Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.
    Hi man . If you have postprocessor for Mitsubishi FX 10, Thanks



  7. #7
    Registered
    Join Date
    May 2004
    Location
    United States
    Posts
    4519
    Downloads
    0
    Uploads
    0

    Default

    If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.



  8. #8
    Registered
    Join Date
    Nov 2011
    Location
    Bosnia and Herzegovina
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by txcncman View Post
    If you look through my old posts, at one time, I posted about 1900 variations on GibbsCam posts. I do not know if one you can use is there, but you are welcome to look.
    ok i will search for it . thanx



  9. #9
    Registered
    Join Date
    Sep 2006
    Location
    usa
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default files

    i have abunch for dostek we use it with gibbscam here they are if you need dostek to just try i can help you pm me if you need that i love it

    Attached Files Attached Files


  10. #10
    Registered
    Join Date
    Sep 2012
    Location
    Poland
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Hey,
    We bought:

    Multiplex 6100 - Mazatrol 640T

    Need Gibbscam Post Processor.

    loleczek196@wp.pl

    thx.



  11. #11
    Registered
    Join Date
    Mar 2013
    Location
    Russia
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by MrCntry View Post
    Here is a post processor for a fadal. If you need any other post processors for GibbsCam just let me know. I have been using the software since Virtual Gibbs. Many years now.
    Hi. Do you have any 5-axis post fo GibbsCAM? I'd be very gratefull.



  12. #12
    Registered
    Join Date
    Jan 2010
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Do you have a post for a Haas ST10Y turning center?
    Thanks!

    ----- <a href="http://www.cambridgemachine.com"> CNC Machine Shop Portland, OR</a>


  13. #13
    Registered
    Join Date
    Jan 2010
    Location
    United States
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default

    Looking for a Gibbs Post for a Haas ST 10Y Thank you!

    ----- <a href="http://www.cambridgemachine.com"> CNC Machine Shop Portland, OR</a>


  14. #14
    Registered
    Join Date
    Apr 2013
    Location
    česká repuklika
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Good day. I have 3 axis machining center ZPS MCFV 1680 MC control system Acramatic A2100 and I need it for GibbsCAM post processor. Can you please help?
    Thank you for your answer, best regards

    Hruška Martin

    aimartinhruska@gmail.com



  15. #15
    Registered
    Join Date
    Jan 2008
    Location
    USA
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default

    I need Help,
    I need a post processor for GibbsCam for a Nardini lathe with Fanuc 20T control.
    Thanks.

    Last edited by LIGAMEC CORP.; 03-12-2014 at 02:40 PM.


  16. #16
    Registered
    Join Date
    May 2015
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: GibbsCam Post Processor Needed

    does anyone have gibbs postprocessors for lathes - haas, doosan and okuma?



  17. #17
    Registered
    Join Date
    Sep 2006
    Location
    usa
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default Re: files

    I'm sorry those files i posted are all Gibbscam .PST files except i think one so you guys need to download them and see if any will help you i cant say for sure but they could possibly help.
    mike



  18. #18
    Registered
    Join Date
    May 2016
    Location
    Spain
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: GibbsCam Post Processor Needed

    Hello,

    I need Fanuc OI posprocessor *.pst file. Can you help me

    Thanks



  19. #19
    Registered
    Join Date
    Aug 2017
    Location
    Viet Nam
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: GibbsCam Post Processor Needed

    THANK YOU SO MUCH



  20. #20
    Member bawbag's Avatar
    Join Date
    May 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: files

    You are a life saver thank you. :-)



Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

GibbsCam Post Processor Needed

GibbsCam Post Processor Needed