Problem You need help wit a Post? - Page 2


Page 2 of 2 FirstFirst 12
Results 21 to 37 of 37

Thread: You need help wit a Post?

  1. #21
    Registered
    Join Date
    Jan 2016
    Location
    New Zealand
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    need post for doosan dnm350_5ax,please PM me.



  2. #22
    Registered
    Join Date
    Sep 2014
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Ajesms has been a real help with my posting issues! Always available with suggestions or tips....if you need help, this is the person you NEED to talk to!

    rog.



  3. #23
    Member
    Join Date
    Oct 2006
    Location
    US
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Ajesms just did a 5 ax post for my 1999 DMG DMU50v that works great! Not a simple feat as Ive got the older Millplus 4.00 control so it doesnt have a lot of the internal 3d math capability that the newer controls have. A pleasure to work with.



  4. #24


  5. #25
    Registered
    Join Date
    Oct 2012
    Location
    sweden
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Hello!
    Looking for post for a Goratu Lagun GBR 4 with heidenhain TNC530
    It has a head that turns in 2.5degres steps.



  6. #26
    Member ajesms's Avatar
    Join Date
    Dec 2010
    Location
    Spain
    Posts
    50
    Downloads
    1
    Uploads
    0

    Default Re: You need help wit a Post?

    Yes i could help you.
    My email is marcesanchez@ibermatica.com


    Enviado desde mi iPhone utilizando Tapatalk



  7. #27
    Registered
    Join Date
    Oct 2012
    Location
    sweden
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    I cant send email to that adress.

    Quote Originally Posted by ajesms View Post
    Yes i could help you.
    My email is marcesanchez@ibermatica.com


    Enviado desde mi iPhone utilizando Tapatalk




  8. #28
    Registered
    Join Date
    Oct 2012
    Location
    sweden
    Posts
    23
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Hello. Did you recive my email?


    Skickat från min iPhone med Tapatalk



  9. #29

    Default

    HI
    how much the compost4



  10. #30

    Default

    hi
    how much the compost4



  11. #31
    madbow77's Avatar
    Join Date
    Aug 2017
    Location
    arbroath
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    hi newbie here can any one help with a post processor for mastercam x2 machine is a bridgeport vmc 560 with a tnc 370 control



  12. #32
    Member ajesms's Avatar
    Join Date
    Dec 2010
    Location
    Spain
    Posts
    50
    Downloads
    1
    Uploads
    0

    Default Re: You need help wit a Post?

    if you need a good postprocessro feel free contact me.



  13. #33
    Member
    Join Date
    Oct 2006
    Location
    US
    Posts
    71
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Marce, Hi, want to work on another gibbs post for me? Simple!!, just a 2 axis lathe ezpath III control. The post I have is not too far off but this control is picky!



  14. #34
    Member ajesms's Avatar
    Join Date
    Dec 2010
    Location
    Spain
    Posts
    50
    Downloads
    1
    Uploads
    0

    Default Re: You need help wit a Post?

    yes of course
    Quote Originally Posted by markp View Post
    Marce, Hi, want to work on another gibbs post for me? Simple!!, just a 2 axis lathe ezpath III control. The post I have is not too far off but this control is picky!




  15. #35
    Registered
    Join Date
    Mar 2018
    Location
    United States
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    I have a Miyano BNC 12 (Model# A02B-0072-B501) with a Fanuc controller. The battery died and we've lost all of the machine side parameters. Does anyone have a copy they can send me?



  16. #36
    *Registered User* gnflores's Avatar
    Join Date
    Aug 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Need help to modify our current post file for a Fadal Mill 4020 with 4 axis rotary table. Our older rotary table was a Fadal VH-65 with a gear ratio of 90: 1 and we are replacing it with an Index Design rotary table VH-6 that has a gear ratio of 60:1. Using GibbsCam



  17. #37
    George123456's Avatar
    Join Date
    Jan 2022
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: You need help wit a Post?

    Email?



Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

You need help wit a Post?

You need help wit a Post?