Ajesms has been a real help with my posting issues! Always available with suggestions or tips....if you need help, this is the person you NEED to talk to!
rog.
need post for doosan dnm350_5ax,please PM me.
Ajesms has been a real help with my posting issues! Always available with suggestions or tips....if you need help, this is the person you NEED to talk to!
rog.
Ajesms just did a 5 ax post for my 1999 DMG DMU50v that works great! Not a simple feat as Ive got the older Millplus 4.00 control so it doesnt have a lot of the internal 3d math capability that the newer controls have. A pleasure to work with.
Hello!
Looking for post for a Goratu Lagun GBR 4 with heidenhain TNC530
It has a head that turns in 2.5degres steps.
Yes i could help you.
My email is marcesanchez@ibermatica.com
Enviado desde mi iPhone utilizando Tapatalk
Hello. Did you recive my email?
Skickat från min iPhone med Tapatalk
hi newbie here can any one help with a post processor for mastercam x2 machine is a bridgeport vmc 560 with a tnc 370 control
if you need a good postprocessro feel free contact me.
Marce, Hi, want to work on another gibbs post for me? Simple!!, just a 2 axis lathe ezpath III control. The post I have is not too far off but this control is picky!
I have a Miyano BNC 12 (Model# A02B-0072-B501) with a Fanuc controller. The battery died and we've lost all of the machine side parameters. Does anyone have a copy they can send me?
Need help to modify our current post file for a Fadal Mill 4020 with 4 axis rotary table. Our older rotary table was a Fadal VH-65 with a gear ratio of 90: 1 and we are replacing it with an Index Design rotary table VH-6 that has a gear ratio of 60:1. Using GibbsCam